Yantai Bonway Manufacturer

ባለ 2-አሃድ ቁመታዊ ውስጠ-መስመር፣ ባለብዙ ደረጃ ፓምፕ ከማይዝግ ብረት መትከያ ፣ ዘንግ እና መካከለኛ ክፍል ፣ የብረት ፓምፕ ጭንቅላት እና መሠረት ፣ ከቁመት ኤሌክትሪክ ሞተር ጋር ተጣምሯል

Kgs

cm

3

የማሸጊያ ክፍያዎች ካለ

በነጠላ ንጥል ወይም በመነሻ ብዛት ላይ የተመሠረተ

 

$€£¥

4

FOB/FOT/FCA ወደብ/ኤርፖርት የመላኪያ ክፍያዎች

 

$€£¥

5

የፖስታ/የአየር/የጭነት ክፍያዎች ለፍራንክፈርት/ሀምቡርግ ጀርመን

 

$€£¥

6

የመነጨው አገር

 

7

የዋስትና ጊዜ

 

አመት

8

ከምርቱ ጋር ያለው የምስክር ወረቀት አይነት

 

 

9

HS የምርት ኮድ *

 

 

 

 

 

 

 

 

10

የክፍያ ውል **

 

 

11

ለማገኘት አለማስቸገር

 ባለ 2-አሃድ ቁመታዊ ውስጠ-መስመር፣ ባለብዙ ደረጃ ፓምፕ ከማይዝግ ብረት መትከያ ፣ ዘንግ እና መካከለኛ ክፍል ፣ የብረት ፓምፕ ጭንቅላት እና መሠረት ፣ ከቁመት ኤሌክትሪክ ሞተር ጋር ተጣምሯል

 

12

ለስላሳ ኤሌክትሮኒክ ካታሎግ pdf, ppt, doc, exl ተያይዟል

አዎ

አይ.

የድር አገናኝ

13

የቀረበው ማሽነሪዎች ማጣቀሻ ዝርዝር

(በማሽን ብቻ)

አዎ

አይ.

 

 

 

አስቀድሜ እናመሰግናለን እና የቴክኖ ንግድ አቅርቦትን ለመቀበል በጉጉት እንጠብቃለን።

 

ምርጡን አገልግሎቶቻችንን ሁል ጊዜ እናረጋግጥልዎታለን እና ከእርስዎ ጋር ነን ጠቃሚ አስተያየትዎን በመጠባበቅ ላይ ፣

 

Please quote the ff: ASAP! GOULDS BRAND.

አመሰግናለሁ,

ጃክ

Specs for the Booster System for 2 units

* Capacity : 50 GPM vs 150 FT. (TDH), approx. 5.0 HP

* Pump Type : Duplex Type Variable Speed Booster Pump System with the following components: 2-units Vertical In-Line, Multi-stage Pump with stainless steel impeller, shaft and intermediate chamber, cast iron pump head and base, coupled to vertical electric motor.

* Electric Motor Drive : 5.0 HP, 230 Volts, 3 Phase, 60 Hz (Coordinate with Electrical for final volt rating).

* Pump Controller : Duplex type, Wye Delta, Pump Controller, Combination Magnetic Starter, complete with individual Molded Case circuit breaker, thermal overload relay, control circuit breaker, control transformer, liquid level relay (LH/RH), alternating relay, indicating lights (power on & run), start and stop push bottons, H-O-A selector switch and terminal block wired in NEMA 12 wall mounted enclosures.

* Accessories : Vibration insulating hose connections at suction and discharge line, wye-strainer at suction side, gate and check valves.

 

We are Brandix Apparel Solutions Limited, who are leading apparel manufacturing company in South Asia. We are looking for an NEMA 34 Worm reducer stepper motor RV050 with motor torque 8.5 Nm and reduction ratio 15 to 1. We highly appreciate if you could share details relevant to our requirement.

 

Christine, the engine was not like that, I want to do a normal assembly on a base, I do not see the shaft, I need the transmission to be with pulley.
How much does it weigh and how many revolutions does it have? Is it for 220 and 380 VAC, 60 Hz?

 

The motor is always like this, we produced them according to your requirement, I also confirmed this issue with you last time and you also agreed it, please see the attached record.
Also, the motor net weight is 25kg, motor speed is 1150 RPM, and it's for 220 V and 380 VAC, 60 Hz.

 

My dear Christine, it seems that I made a mistake, the engine is fine but the revolution output is between 58 to 66 RPM. I send you the complete image, I will try to reduce it with pulleys, give me how much it costs me to put this system or produce another motor of this
type ?.

 

መልካም ቀን ይሁንልዎ!

Ok, thank you for your kindly feedback.
If you need the reducer, yse, we can provide it to you.
And follow your request, the reducer detailed as below:
1. Recommend model: BWD2-23-2.2KW
2. Motor Power: 2.2 KW
3. Gear Ratio: 23
4. Motor Speed: 1150 RPM
5. Voltage and Frequency: 220 V and 380 VAC, 60 Hz
6. Real Photo (Please see the attached Picture)
7. Technical Drawing (Please see thr attached drawing)
That's all detailed of our recommend reducer, please confirm whether is it ok for you? Thank you!

የአንተን ደግ ምላሽ በመጠበቅ ላይ።

 

መልካም ቀን!

ደንበኞቻችን እኛን ያነጋግሩን እና ከዚህ በታች ያሉትን ዕቃዎች መግዛት ይፈልጋሉ።

እባክዎን በቅርቡ ይመልከቱ እና ይጥቀሱልን፡-

 

Induction motor,

Brand :JIA CHENG,

90 ኤል ዓይነት

Qty:1 PC

 

ደንበኞቻችን ካታሎግ ፣ C/O (የትውልድ የምስክር ወረቀት) ፣ C/Q (የጥራት የምስክር ወረቀት) እና ጥቅም ላይ ያልዋሉ ምርቶች ይፈልጋሉ።

በቅርቡ ከእርስዎ ምርጡን ጥቅስ ለመቀበል በጉጉት እንጠብቃለን።

 

መልካም ቀን እንዲሆንላችሁ እመኛለሁ!

I'm sorry that we just confirmed that the ZQ gearbox has arrived at the port, and ready to go on aboard.
So now it's late to send the 5 pcs reducers, and the we also need 7-10 days to produce the reducers.
If you need the 5 pcs reducers, we can only wait for the 5 pcs reducers to be ready, and then book the next shipment date.
Hope you can understand. Thank you!

Greetings !!!!!!!!

As discussed over phone as well as on whats app, the given dispatch schedule is not acceptable to us.

You told us to dispatch GB max between 30.6.19 to 5.7.19.

The terms of dispatch of GB was, within 30 days after receipt of advance. We made advance remittance on 29.5.19.

Pls ask your factory team about the urgency & try to finish the work on or before 12.7.19.

We highly appreciate you kind cooperation in this regard.

Awaiting for your valuable reply.

 

Every way is very heavy for the use that I need, the motors that you have sent me have not shown me the photo, nor the ZQ, they are with long axles of 1000 MM. true?.
if not, they do not help me, Christine.

 

I found that your offered gear box+motors are very heavy. For example small enginge 2,0kw + gear box weight should be about 30kg (your is 121!!!) I think there is some mistake

 

ስለ ደግነት አስተያየትዎ እናመሰግናለን።
About your question, the small enginge 2,0kw + gear box weight is no mistake, it's really 121Kg for gross weight, and it's net weight is 113 Kg.
Also, we quote to you is our alternative gearbox, it will be heavier and biger than your attached picture to us.
So please confirm whether our gearbox is it ok for you?

 

I thoud what you quote me is bigger one (you told "heavier and biger than your attached picture to us"). But for small ine (2,0kw 230v/110v) your offered price is higher then what I expect. That's why I ask for some alternative with smaller and better price.

 

መልካም ቀን አለ!

Follow your request, we kindly recommend the suitable gear-motor to you, please see the technical data.
It will be meet your needs for 2000w 48v motor with a gearbox with ratio 60.
Also, please let us know your purchase quantity, then the best quotation will be sent to you soon.

 

መልካም ቀን ይሁንልዎ!

We received your payment today, thanks again for the new order.
Now we're arranging the production for you.
About the SEW motor Model DRN180L4/FM, could you send us the motor's nameplate?

የአንተን ደግ ምላሽ በመጠበቅ ላይ።

 

ስለ መረጃው አመሰግናለሁ ፡፡
Yes, we have them, you sent to us when you ask the SEW motor, and we also checked them.
Now we need the original motor's nameplate to confirm some details, do you have it?

መልካም ቀን አለ!

About the new inquiry for V3HV9 gearbox, is there any news?
Here is the technical drawing without output flange, please check.
Also, any question, welcome to contact us for more details.

የአንተን ደግ ምላሽ በመጠበቅ ላይ።

 

መልካም ቀን ይሁንልዎ!

About your ordered SEW motor (Model DRN180L4/FM), It's ok to according to the motor specifications you provided.
The SEW company can be produced, but the SEW company said it would be better to provide the motor nameplate for us check, just in case if something will be wrong, or the motor has some special customization and so on.
Of course, if you end user don't have the motor nameplate, we will produce according to your attached specifications and drawing, so hope you can understand. Thank you!

የአንተን ደግ ምላሽ በመጠበቅ ላይ።

 

speed of motor (input speed) makes no differ for us.

690rpm is gearbox output speed we need for our pumps correct working.

ስለ ማረጋገጫዎ እናመሰግናለን።
Please see the attached to confirm you need the 220V*3 or 380V*3?
Also, about the BRL 125D (just have 125D, don't have 120D in your catalog), please see the marked power 1.25kw and 2.5kw, to confirm which power is ok for you? These 2 powers correspond to torque of 4NM and 8NM respectively.

መልካም ቀን አለ!

Here is the best price list, please check as below:

SR # Description QTY UNIT EXW Price
1 Magnatic Contactor, 380/400V , 9A , 4KW , 50/60Hz,
Manufacturer Code/Type: A9-30-10, Make: ABB 1 EACH 62$
2 Magnatic Contactor, 380/400V , 26A , 11KW , 50/60Hz, Manufacturer Code/Type: A26-30-10, Make: ABB 1 EACH 90$

የአንተን ደግ ምላሽ በመጠበቅ ላይ።

እንደምን ዋልክ! እባክዎን ኤፍኤፍን ይጥቀሱ፡ ASAP!

2 UNT-- INDUCTION MOTOR, 30KW 1775RPM 440V 3PHAS
SQUIRREL CAGE ማስገቢያ ሞተር
የምርት ስም: ቢ.ቢ.
Frame Model: M2QA 200 L4A 4
30 ኪ.ወ፣ 440 ቮልት፣ 60 ኸርዝ፣ 3-ደረጃ
ፍጥነት: 1775 ደቂቃ
IE3 Compliant Motor
የጥበቃ ደረጃ: IP55
የመተንፈሻ አካላት: ረ
Mounting Type: Flange Type / IMV1
የብረት-ብረት ሞተር ፍሬም

240V 50Hz 1 phase 1.8 Kw(2.5hp) - Nema 56C flange and foot 1425 RPM

110V 60hz 1 phase 1.8kw - Nema 56C flange and foot 1750 RPM

415V 50hz 3 phase 1.8kw - Nema 56C flange and foot 1425 rpm

220V 60hz 3 phase 1.8kw - Nema 56C flange and foot 1750 rpm

 

These can be 2 capacitor motors, 1 start cap, 1 run cap.

 

Photos attached of what we have been using previously.

 

I am interested in work gear type with motor with brake suitable for
inverter included.
Also in F type gerabox with motor +brake suitable for inverter included.

 

pls qoute the best price , weight dimention stok n catalog must provided :

1 pc gear motor 3 HP , 48 rpm , sew R 77 DRS 90L4 , 2,2 Kw 3 hp , 1440 .. 48 rpm , 435 nm 1,90 , 40 mm , 230/400 V 3 phase 50 hz

 

ኢሜል ስላደረግክልኝ አመሰግናለሁ.

We are doing fabrication of Belt conveyor. Please kindly advise us to use suitable Motor.
1) Power - 5.5KW, 7.5KW, 11KW, 15KW, 22KW, 30KW
2) Speed - 1480-1500 rpm as your standard
3) Voltage & Frequency - 380V / 3Phase / 50Hz
4) Purchase Qty - 2pcs each
5) Class - Insul F, IP55 / IE1 or IE2
6) Name plate - in English
7) Lead time or stock available - ?

 

Pls revise with following changes ;

1. Pls check PL. You mention Net Wt. 1516 kg & Gross Wt. is 1570 kg -----------But Now You mention 2645 Kg Gross wt in BL as well as COO.-----Pls clarify
2. In earlier draft of BL Vessel Name was --- TBA 829 & Note It shows --ER Kobe 17 W ------ Pls clarify

Also, we need proof to show custom official for relation between these two companies which you mentioned in COO. You can give on your letter head.

Hope it is very clear now.

 

CUSTOMER SAYS

You are correct. You may include option for both voltages. The frequency
of 50Hz is per Pakistan requirement. Also these days mostly things are
dual voltage 110 ~ 220 VAC.
On another note, I sent another inquiry of pump. Please advise if you are
able to provide quotation.

 

እንደምን ዋልክ! እባክዎን ኤፍኤፍን ይጥቀሱ፡ ASAP!

2PC -- INDUCTION MOTOR, 5.5KW 1755/55RPM 3PHASE
Geared ሞተር ስብሰባ
የምርት ስም: SEW
Frame Model: R87 DRE132M4
ሞተር ዝርዝሮች-
5.5 ኪ.ወ፣ 440 ቮልት፣ 60 ኸርዝ፣ 3-ደረጃ
ፍጥነት: 1755 ደቂቃ
የጥበቃ ደረጃ: IP55
የመተንፈሻ አካላት: ረ
IMB5 Flange Mounted
የብረት-ብረት ሞተር ፍሬም
Gearbox የውጤት ፍጥነት: 55 rpm
ልኬቶች:
L x W: 260mm x 210mm
Shaft Height: 175mm
Shaft Diameter: 50mm (54.55mm w/ key)

2 PC --- GEARED MOTOR, 5.5KW 1755/55RPM 3PHASE
Geared ሞተር ስብሰባ
የምርት ስም: SEW
Frame Model: R87 DRE132M4
ሞተር ዝርዝሮች-
5.5 ኪ.ወ፣ 440 ቮልት፣ 60 ኸርዝ፣ 3-ደረጃ
ፍጥነት: 1755 ደቂቃ
የጥበቃ ደረጃ: IP55
የመተንፈሻ አካላት: ረ
IMB5 Flange Mounted
የብረት-ብረት ሞተር ፍሬም
Gearbox የውጤት ፍጥነት: 55 rpm

 

Do you supply this below part???

If so please send me the price at the earliest possible……

We are in need of following materials at our plant site. The details is as mention below:

Feeder gear box view glass (threaded) Moc brass(Photo Attached) Thread Size: 1.5”

የኛ

21

 

እንደምን ዋልክ! እባክዎን ኤፍኤፍን ይጥቀሱ፡ ASAP!

1PC --SEW Brake Assembly PN: BMG8 5.5kW w/ Spline Carrier ; Brake voltage is 220v ; 25NM

2PC---COLLAR FOR BMG-8 SEW MOTOR BRAKE

1PC---SEW BM4 BRAKE ASSY WITH COLLAR

 

Please fill following table for each drive unit completely and send it back to me ASAP.

ባለ 2-አሃድ ቁመታዊ ውስጠ-መስመር፣ ባለብዙ ደረጃ ፓምፕ ከማይዝግ ብረት መትከያ ፣ ዘንግ እና መካከለኛ ክፍል ፣ የብረት ፓምፕ ጭንቅላት እና መሠረት ፣ ከቁመት ኤሌክትሪክ ሞተር ጋር ተጣምሯል

መለያ ቁጥር

Conveyor name
DRIVEN EQUIPMENT
መለኪያ

Driven Equipment
° ሴ

ዓይነት
-

Drive Pulley Bearing Shaft Diameter
mm

ብዛት
አይ.

የተሳሳተ ኃይል
kW

Required Input Speed
ሪች

ሞተር
መለኪያ

ባለፉብሪካ
-

የሞዴል ቁጥር
-

ካታሎግ ቁ.
-

Installed Motor Power (2)
kW

Speed, Nominal
ሪች

Speed, Actual
ሪች

Line Voltage/Frequency
ቪ/ኤች

Protection/Insulation Class
-

የማዞሪያ አቅጣጫ
-

የክፈፍ ቁሳቁሶች
-

ሚዛን
kg

የግብአት ትስስር
መለኪያ

ባለፉብሪካ
-

Type: HC:Hydro-coupling (Fluid Coupling); FC:Flexible
Coupling; DC: Direct Contact (Gearmotor)
-

ሞዴል
-

ካታሎግ ቁ.
-

የስም ኃይል ደረጃ
kW

የዉስጥ ልብስ
%

Large Delay Chamber
-

Ass./Reass. without shaft moving
-

Fusible Safety Plug
-

የነዳጅ አቅም
ሊትር

ዘይት ዓይነት
-

ሚዛን
kg

ብሬክ
መለኪያ

ባለፉብሪካ
-

የሞዴል ቁጥር
-

ካታሎግ ቁ.
-

Brake Required
-

Required Min. Braking Torque at GB Input Shaft
Nm

Brake Max. Torque
Nm

ሚዛን
kg

የፍጥነት መቀነሻ
መለኪያ

ባለፉብሪካ
-

የሞዴል ቁጥር
-

ካታሎግ ቁ.
-

Type, Bevel Helical (BH)
-

No. of Stages
አይ.

Output Shaft Configuration (HS: Hallow Shaft; SS: Solid Shaft)


Transmission Ratio, Nominal
-

Transmission Ratio, Exact
-

Output Speed, Exact
ሪች

የማቀዝቀዝ ዘዴ።
-

Installation Position with Respect to Drive Pulley(4)
-

Installation position (According to Catalogue)
-

Rotation Free Direction
-

Service Factor, min
-

Mechanical Power
kW

የሙቀት ኃይል
kW

ዉጤት የሚሰጥ ችሎታ
%

የመሳሪያ ቁሳቁስ
-

የሉኪንግ ዘዴ
-

የነዳጅ አቅም
ሊትር

ዘይት ዓይነት
-

ሚዛን
kg

BACK STOP
መለኪያ

ባለፉብሪካ
-

የሞዴል ቁጥር
-

ካታሎግ ቁ.
-

Back stop required
-

Required min. locking torque at GB input shaft
Nm

Back stop Nominal Torque
Nm

የውጤት ትስስር
መለኪያ

ባለፉብሪካ
-

Type: FC:Flexible Coupling; HS: Hallow Shaft
-

ሞዴል
-

ካታሎግ ቁ.
-

የስም ኃይል ደረጃ
kW

Assembly and Dismantle without shaft moving
-

ሚዛን
kg

ቤዝ ፍሬም
መለኪያ

Swing Base+Torque Arm
-

ባለፉብሪካ
-

ካታሎግ ቁ.
-

ሚዛን
kg

ጠቅላላ
መለኪያ

Protection layer on exposed shaft surfaces
-

ሥዕል
-

ባለ 2-አሃድ ቁመታዊ ውስጠ-መስመር፣ ባለብዙ ደረጃ ፓምፕ ከማይዝግ ብረት መትከያ ፣ ዘንግ እና መካከለኛ ክፍል ፣ የብረት ፓምፕ ጭንቅላት እና መሠረት ፣ ከቁመት ኤሌክትሪክ ሞተር ጋር ተጣምሯል
Please contact me if I can be of further assistance.

 

I would appreciate your kind help and support to get the attached photos of 10hp single phase electric motor in your company.
I am a registered member, done occasion I have been trying to get in touch with sales manager, I couldn't rich out to anyone.
Pls እገዛ.

 

You are correct. You may include option for both voltages. The frequency
of 50Hz is per Pakistan requirement. Also these days mostly things are
dual voltage 110 ~ 220 VAC.
On another note, I sent another inquiry of pump. Please advise if you are
able to provide quotation.

 

እንደምን ዋልክ! እባክዎን ኤፍኤፍን ይጥቀሱ፡ ASAP!

2PC -- INDUCTION MOTOR, 5.5KW 1755/55RPM 3PHASE
Geared ሞተር ስብሰባ
የምርት ስም: SEW
Frame Model: R87 DRE132M4
ሞተር ዝርዝሮች-
5.5 ኪ.ወ፣ 440 ቮልት፣ 60 ኸርዝ፣ 3-ደረጃ
ፍጥነት: 1755 ደቂቃ
የጥበቃ ደረጃ: IP55
የመተንፈሻ አካላት: ረ
IMB5 Flange Mounted
የብረት-ብረት ሞተር ፍሬም
Gearbox የውጤት ፍጥነት: 55 rpm
ልኬቶች:
L x W: 260mm x 210mm
Shaft Height: 175mm
Shaft Diameter: 50mm (54.55mm w/ key)

2 PC --- GEARED MOTOR, 5.5KW 1755/55RPM 3PHASE
Geared ሞተር ስብሰባ
የምርት ስም: SEW
Frame Model: R87 DRE132M4
ሞተር ዝርዝሮች-
5.5 ኪ.ወ፣ 440 ቮልት፣ 60 ኸርዝ፣ 3-ደረጃ
ፍጥነት: 1755 ደቂቃ
የጥበቃ ደረጃ: IP55
የመተንፈሻ አካላት: ረ
IMB5 Flange Mounted
የብረት-ብረት ሞተር ፍሬም
Gearbox የውጤት ፍጥነት: 55 rpm

 

Do you supply this below part???

If so please send me the price at the earliest possible……

We are in need of following materials at our plant site. The details is as mention below:

Feeder gear box view glass (threaded) Moc brass(Photo Attached) Thread Size: 1.5”

የኛ

21

 

እንደምን ዋልክ! እባክዎን ኤፍኤፍን ይጥቀሱ፡ ASAP!

1PC --SEW Brake Assembly PN: BMG8 5.5kW w/ Spline Carrier ; Brake voltage is 220v ; 25NM

2PC---COLLAR FOR BMG-8 SEW MOTOR BRAKE

1PC---SEW BM4 BRAKE ASSY WITH COLLAR

 

Please fill following table for each drive unit completely and send it back to me ASAP.



መለያ ቁጥር

Conveyor name
DRIVEN EQUIPMENT
መለኪያ

Driven Equipment
° ሴ

ዓይነት